- Feb 23, 2015
- Views: 25
- Page(s): 12
- Size: 3.59 MB
1 PRODUCT GUIDE 2015
2 Product Guide With over 25 years experience, make Scanstrut an essential part of your Raymarine electronics installa- tion. Fully endorsed and recommended by Raymarine, a selection of the best-selling Scanstrut range is stocked centrally and available to order from Raymarine dealers worldwide. Marine Electronics Mounts Scanstrut Accessories Electrical Accessories We offer a standard range of over 100 different A range of Accessories is available for your Electronics and seawater are not the best of installation products to mount your Raymarine Scanstrut installation. From mounting an friends and its essential that your installation radar, satcom, MFD displays, instruments, cameras additional light or GPS Antenna, to accessories remains dry inside. and GPS antennas onto yachts, powerboats, which aid installation and performance. commercial and military vessels. The Scanstrut range of Electrical Accessories will ensure you complete your marine electronics install in the best way possible. We offer a range of products to install the following: Raymarine Marine Electronics Scanstrut Products RADAR OPEN ARRAY SATCOM GPS ANTENNA DISPLAYS INSTRUMENTS CAMERAS PAGE Self-Levelling Radar Mount 2 Mast Mount 3 SC100 Pole Mount 4 PowerTower 5 Dual PowerTower 6 Tapered Mast 6 Satcom Antenna Mount 7 Scanpod 8/9 ROKK 10 Camera Mounts 10 Electrical Accessories 11 Visit www.scanstrut.com for further product information and technical specifications.
3 Self-Levelling Radar Mount 2 RADOMES As tested by "Picture perfect radar performance." Beautifully styled and expertly engineered Backstay Mounted Mast Mounted to ensure your radar stays level with the horizon at all times for optimum antenna Can be installed on both adjustable and Radome cradle with fine tune adjustment for performance. split backstays. different mast rake angles. Attaches to mast with four swivel feet, matching As the boat heels or rolls, the radar is kept Options to mount radome fore or aft of backstay. a variety of mast profiles. horizontal preventing target loss and giving the best possible radar picture. 2.6m (86) aluminium mounting pole supplied in 2 lengths with hidden joiner piece. Maintenance free & no power required. Can be deck, transom or chainplate mounted. Range of nylon bushes supplied. Clamps around backstay so cable tension can be adjusted. TIP: When mounting radome forward of backstay, check clearance between radome and mainsail. ACCESSORIES AVAILABLE: ORDERING INFO GPS / VHF Antenna Mount for Self-Lev- Scanstrut Raymarine Description elling Radar Mount Item Code Item Code Single mount for installing an additional GPS LMB-A1 X10002-SCA Backstay Mount (aft mounted radar) / VHF antenna above the radar. (1 by 14 tpi LMB-F1 X10001-SCA Backstay Mount (fore mounted radar) thread) LMM-F1 X10000-SCA Mast Mount Scanstrut Raymarine Description Item Code Item Code All compatible with RD418D / RD424D / RD418HD / RD424HD LM-GPS A80117 For all Leveller models
4 Mast Mount 3 RADOMES SATCOM/TV Still the first choice for boat owners Worldwide, Scanstrut leads the way with a new generation of Mast Mounts. Stronger. Lighter. Easier to fit. Attaches to mast with four swivel feet, matching a variety Safety wire kit independently attaches scanner to mast for additional protection. ACCESSORIES AVAILABLE: ORDERING INFO Radar Guard Scanstrut Raymarine Description Polished stainless guards protect radome Item Code Item Code from damage and reduce wear on the M92722 M92722 To fit RD418D / RD418HD sails. M92698 M92698 To fit RD424D / RD424HD Mounted using radome bolts, no extra fastenings required. Scanstrut Raymarine Description Item Code Item Code SC27 X1006-SCA To fit M92722
5 SC100 Pole Mount 4 RADOMES SATCOM/TV Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box. 1.9m (6.4) recommended for level deck Rail stand-off Deck strut Adjustable base mounting and 2.5m (8.3) recommended for sloping transoms. Accommodates two cable channels with a cover strip to hold cables in place and out of view. Two support modules provide maximum fore / aft and sideways support. Unscrew base and remove pole for racing or winter storage, leaving just ACCESSORIES AVAILABLE: ORDERING INFO Nav Light and GPS / VHF Antenna Scanstrut Raymarine Description Mount Item Code Item Code Install Nav Light, GPS or VHF antennas above the radar SC101 X10010-SCA 1.9m height SC100 Pole* for maximum visibility and performance. SC102 X10011-SCA 2.5m height SC100 Pole* Attach using radar mounting bolts, no extra fastenings SC2-4 X10120-SCA 4m Through Deck SC2 Pole** required. (1 by 14 tpi thread) Scanstrut Raymarine Description *Compatible with RD418D / RD424D / RD418HD / RD424HD Item Code Item Code **Compatible with RD418D / RD424D / RD418HD / RD424HD Use with SC110 X10017-SCA For Nav Lights (Port mounted) SC45R for 45STV / with SC65 for 60STV SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted) SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
6 PowerTower 5 RADOMES SATCOM/TV Install your antenna on the cabin Choice of material: roof, flybridge or radar arch of your powerboat. Antenna fastens to PowerTower using own mounting bolts. Pre-drilled mounting holes for ease of installation. IP65 gland supplied to seal cable into stem Aluminium Composite Stainless steel for internal cable management. Stronger for heavier equipment. Lightweight, suits any boat. Ideal for narrow RIB arches. Watertight base seal included no need White powder coated. for messy sealant. 25 forward leaning (30 aft 30 aft leaning. 30 aft leaning. leaning for open array). Choice of 150mm (6) or 150mm (6) height. Choice of 130mm (5) or 350mm (14) heights. 250mm (10) heights. ACCESSORIES AVAILABLE: ORDERING INFO Nav Light and GPS / VHF Antenna Scanstrut Raymarine Description Mount Item Code Item Code Install Nav Light, GPS or VHF antennas above the radar APT19000 A80122 130mm height | Aluminium for maximum visibility and performance. PT2001 X10012-SCA 350mm height | Composite Attach using radar mounting bolts, no extra fastenings PT2004 X10013-SCA 150mm height | Composite required. (1 by 14 tpi thread) SPT1001 A80121 150mm height | Stainless steel Scanstrut Raymarine Description Item Code Item Code Compatible with RD418D / RD424D / RD418HD / RD424HD SC110 X10017-SCA For Nav Lights (Port mounted) SC111 X10018-SCA For GPS / VHF Antenna (Starboard mounted) SC112 X10019-SCA For GPS / VHF Antenna (Port mounted)
7 Dual PowerTower 6 RADOMES OPEN ARRAY SATCOM/TV Elevating the satcom antenna above the radar Compact Dual PowerTower ORDERING INFO eliminates antenna interference and ensures Features an adjustable mounting plate to allow maximum performance from both applications. for variation in radome size. Scanstrut Raymarine Description Item Code Item Code Antenna fastens to PowerTower using own Positions the radar as close as possible to the mounting bolts. structural centre of gravity, ensuring minimal DPT-SR1-30 X10014-SCA Radar* + 33STV/37STV load is placed on the radar arch. DPT-SR1-40 X10015-SCA Radar* + 45STV Pre-drilled mounting holes for ease of installation. DPT-S01-40 X10016-SCA Open array** + 45STV IP65 gland supplied to seal cable into stem *Compatible with RD418D / RD424D / RD418HD / RD424HD for internal cable management. **Compatible with RA1048D / RA3048HD / RA1048SHD / Watertight base seal included no need RA3048SHD for messy sealant. TIP: Ideal for smaller powerboats where mounting space is limited. Tapered Mast RADOMES SATCOM/TV CAMERAS LIGHTS GPS / VHF ANTENNA Single combination mount for multiple marine electronics. ORDERING INFO Each item is positioned for maximum performance. Scanstrut Raymarine Description Item Code Item Code PTM-R1-1 A80147 Radar* Install up to 4 GPS/VHF antenna. PTM-R1-S40 A80148 Radar* + 45STV Hollow wings and stem allow hidden cabling. *Compatible with RD418D / RD424D / RD418HD / RD424HD Option available to mount additional 30cm/40cm satcom at the top of the mast.
8 Satcom Antenna Mount 7 SATCOM/TV TIP: Mounting on a curved arch? The Adjustable Base Wedge accessory will solve your problem and level your satcom installation. Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna. Single piece composite GRP moulding for high strength and corrosion resistance*. and antenna. and maintenance. * Stainless steel mounts available to install larger KVH M9 & Intellian i9 antenna. ACCESSORIES AVAILABLE: Adjustable Base Wedge Satcom antennas require a horizontal mounting surface to function correctly. ORDERING INFO Satcom wedges eradicate this problem by providing a level mounting on slopes from 0 Scanstrut Raymarine Description to 12. Item Code Item Code Simply counter rotate the angled discs until SC30 X10018-SCA Fits 33STV the top surface is horizontal. SC35 X10021-SCA Fits 37STV Scanstrut Raymarine Description SC45R X10022-SCA Fits 45STV Item Code Item Code SC65 X10023-SCA Fits 60STV SC50 X10026-SCA Compatible with SC35, SC45R and SC65 only.
9 Scanpod 8 INSTRUMENTS DISPLAYS The product of choice for leading boat builders World- wide, the Scanpod range has gained an enviable reputation for exceptional quality since its launch in 2009. Helm Pod Great design and neat features ensure the Scanstrut Helm Pod is the perfect choice for all cockpit configurations. Our unique No-Drill clamping system provides a universal fit on any pedestal rail. A set of mounting saddles gives a secure, watertight fixture at the rear of the pod. Universal helm fixing Fits pedestal rails from 25mm to 33.7mm. Using a unique clamping system, the pod can fit rail widths from 178mm upwards. No Drill fixing kit Customised U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. Secure & watertight install A saddle system supports the stainless tubing to allow a secure and rigid fit onto any pedestal and also ensures a watertight seal ORDERING INFO at cable entry. Scanstrut Raymarine Description Item Code Item Code SPH-3I-W A80110 3 x Std Instruments SPH-4XI-W A80194 1 x e7 & 2 x i70 SPH-8D-W A80112 Up to 9 Displays SPH-8-W-E9 A80183 Pre-cut for e9 MFD SPH-12D-W A80113 Up to 12 Displays SPH-12-W-E12 A80184 Pre-cut for e12 MFD SPH-15D-W A80114 Up to 15 Displays SPH-SYSTEM-W A80115 9 Display + 4 Std Instruments / 12 Display + 2 Std Instruments
10 Deck Pod 9 Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailbot ORDERING INFO wheelhouse. Using a one-handed quick release lever, simply release, Scanstrut Raymarine Description swivel and tilt to suit your requirements before locking Item Code Item Code back into position. SPD-4XI-W A80193 1 x e7 & 2 x i70 Swivel & tilt base SPD-7-W-E7 A80185 For e7 One handed quick release action. Simply release the SPD-8D-W A80103 Up to 9 Displays lever, swivel and tilt to suit requirements before lockng back into position. SPD-8-W-E9 A80186 Pre-cut for e9 MFD SPD-12D-W A80104 Up to 12 Displays Best viewing angle An adjustable ball joint allows range of movement SPD-12-W-E12 A80187 Pre-cut for e12 MFD and multiple mounting angles. SPD-15D-W A80105 Up to 15 Displays Added strength An inner bracing plate secures the Deck Pod base to the pod and gives increased rigidty to the assembly eliminating potential damage from shock and vibration. Rail Pod Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments. The new Arm and Rail Mount options allow smaller instruments and chartplotters to be rail ORDERING INFO mounted anywhere onboard. Options to install Scanstrut Raymarine Description Item Code Item Code Designed with options to install 7 displays or 1 standard instrument. SPR-7-RM A80239 For a6 to e7 (Rail Mounted) SPR-7-AM A80240 For a6 to e7 (Arm Mounted) Arm Mounted Rail Mounted Extend the Pod away from narrow or crowded rails for Fit your display onto standard and curved rails. better viewing. Designed to ensure the Pod is always Viewing angled can set upon installation. Cables are positioned for best viewing whatever the angle of the routed internally through clamp and into the rail. rail. Cables are routed internally and accessed easily via a removable cover. Mast Pod Whether racing or cruising, our Mast Pods give you the best view of your instruments. ORDERING INFO Mast arms pivot to provide a universal fit to a wide range Scanstrut Raymarine Description of mast sizes. A cross-brace adds rigidity and prevents Item Code Item Code sideways movement of the pod. SPM-3I-W A80106 3 x Std Instruments Universal mount SPM-4I-W A80149 4 x Std Instruments The range has been designed to fit mast sizes from 76mm to 223mm. Mast arms pivot about semi circular washers and an SPM-2MAXI-W A80108 2 x ST70+ Maxi Instruments additional cross-brace provides stiffness preventing sideways SPM-MAXI-W A80109 3 x ST70+ Maxi Instruments movement. SPM-MAXI-C X10309 3 x ST70+ Maxi Instruments (Carbon) Carbon Mast Pod
11 ROKK 10 INSTRUMENTS DISPLAYS A multi position mount for small electronic devices onboard. Adjustable Deck and Rail Mount Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard , nav station and more. Set and forget system ensures zero loss of clamping force over time. Locking design provides a rock solid platform and a high clamping force with minimal effort from user. Designed to be versatile. Mount anywhere onboard. Engineered to withstand high shock loading. Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability. Easily adjusted. Unlock, reposition, lock again. 360 of rotation. 136 of tilt. ORDERING INFO Scanstrut Raymarine Description Compatability Item Code Item Code RL-RM-RYM A80295 rail mount All Rokk Mounts for a6, RL-ARM-RYM A80294 adjustable rail a7, e7 mount RL-ADM-RYM A80293 adjustable deck & Dragonfly mount Camera Mounts CAMERAS Options for installing Raymarine thermal imaging cameras onto your power or sail boat for maximum visibility at all times. Camera Mast Mount Camera PowerTower Compact Mast Mount for installation onto Raise your Camera from the deck to ensure clear yacht masts. visibility at all times. Designed with a 30 aft leaning profile and a small base footprint. Same great features as our standard Mast Mount Same great features as our standard PowerTower range range (see page X). (see page X). ORDERING INFO Scanstrut Raymarine Description Item Code Item Code CAM-MM-01 A80118 Mast Mount* CAM-PT-150 A80119 PowerTower* - 150mm height CAM-PT-300 A80120 PowerTower* - 300mm height *Compatible with M-Series, T-Series & Navigator
12 Electrical Accessories 11 Electronics and seawater are not the best of friends and its essential WAT E that your installation remains dry inside. GUA RPROOF RAN IPX6 TEE & The Scanstrut range of Electrical Accessories will ensure you Tes IPX7 App ted & complete your marine electronics install in the best way possible. rove d. Deck Seals The only guaranteed and proven watertight installation for Multi Deck Seal your antenna and navlight cables. Designed to fit multiple cables up to 15mm dia. Pass cables into the boat, anywhere on deck. No need to Supplied with undrilled seal and made from marine remove cable plug. grade aluminum with hard anodised finish to resist impact marks. Low profile shape for a stronger, impact resistant seal. No sharp edges to hit your foot on! Supplied with blank and pre-drilled inner seals. Split seal eliminates need to remove cable connectors during install. Captive nuts in base provide easy assembly and allow reliable repeat installations. ORDERING INFO Scanstrut Raymarine Description Item Code Item Code DS16-P A80123 Connectors up to 16mm | Cables 2-8mm DS21A-P A80124 Connectors up to 21mm | Cables 4-9mm DS21B-P A80125 Connectors up to 21mm | Cables 9-14mm DS30-P A80126 Connectors up to 30mm | Cables 9-14mm DS-MULTI A80127 Multiple cables up to 18mm Junction Box The fit and forget Junction Box range is the perfect sailing accessory for anyone planning boat maintenance, providing secure, IP66 watertight connections for marine electrical cables onboard any boat. Choice of standard box with 5 screw-down terminals or a deluxe version which includes 10 fast-fit terminals for a quicker install. Fit directly to chosen surface. A mounting bracket is included to allow easy removal for inspection. Upgrade to IP67 with a Cable Seal upgrade kit. ORDERING INFO Scanstrut Raymarine Description Item Code Item Code SB-8-5 A80129 Standard Junction Box | 5 screw down terminals SB-8-10 A80130 Deluxe Junction Box | 10 fast fit terminals SB-2G A80128 Cable Seal Pack (x2) Visit www.scanstrut.com for further information.Load More